Stainless steel 3.7 cu ft plate and frame filter press. The 19 plates have an 18″ diameter with a 17″ interior screen area. The 20 frame areas are 1.43″ deep. The plates have a .875″ inlet and outlet. The filter has a manual closure system. The inlet and outlet are connected to two 2″ NPT fittings. This filter is also equipped with a Viking gear pump that is driven by a 3 hp 1165 rpm motor. Requires 230/460 vac 3 phase electrical supply. This is most likely a Star filter press. $5,950.00
Ertel .9 cu ft chrome plated brass plate and frame filter on carbon steel frame with casters. Serial # EU 256-337BN. There are 1.25″ inlets and outlets on each corner. Equipped with a hand wheel plate compression. The dimensions are 89″ l x 26″ w x 46″ h. Filter has 14 plates and 14 frames. Frames are .5″ thick and 15″w x 15″l. Fair condition. $2,950.00
Sperry .11 cuft plate and frame filter press. Size 8. Type 8. Filter has 1/2″ inlets and outlets at the corners. Filter has a total of 6 plates and 5 frames. The frames have a cake area of 6.5″ x 6.125″ and are 1″ deep. Outside dimensions of plate and frames are 8″ x 8″. It has a mechanical closing system. Overall dimensions of filter on the casters are 40″ l x 20″ w x 46″ h. Serial # X8959. Good Condition. $2,450.00
Ertel .25 cuft stainless steel plate and frame filter on casters. Name tag is missing but appears to be an Ertel EDB filter set up with screens on all plates. According to the manufacturer, this can be used when back pressure is a problem. The screens can be removed on inlet plates to make a conventional plate and frame filter with .25 cuft of capacity. 1″ inlets and outletes. Equipped with hand wheel plate compression. Good condtion. (Have spare frames and screens) $3,900.00
americanbarrelexchange.info 